View video: 6 pictures hacks for digital camera lens and overall body caps
It would appear that there’s a never ever-ending sea of extras on the market place available for DSLRs and mirrorless cameras, but there’s a certain item that I can warranty each individual photographer owns: the humble lens and entire body caps that came with your digital camera.
• Read far more: Best camera components
For interchangeable lens cameras you are going to have 3 caps in whole: a lens cap, which snaps onto the front of the lens to secure the front aspect, a rear lens cap, which shields the rear lens component, and a human body cap, which goes on the digital camera mount to protect the interior workings and the sensitive impression sensor. They are all built to quit dust obtaining in and hold your optics safeguarded, so that they really do not get scratched when your kit is stowed away and not in use.
You can locate out what sizing your front lens cap is by getting it off the lens and wanting at the again of it, it will say what size filter thread it matches, like 77mm or 58mm for case in point – this also tells you what sized filters you can fit to your lenses as very well.
We’ll be having a glance at how you can modify lens caps to greatly enhance their usability, acquire a lot more resourceful pictures and even reduce you from dropping them so conveniently!
01 Repair white equilibrium woes
It is attainable to acquire lens caps with an built-in white stability reference – just make sure you get just one that fits your lens’ front filter thread. The concept is that you can use it to established a customized white harmony in-digicam, or hold it in a ‘test’ shot and use it as reference level when enhancing.
You can use the White Balance eye dropper tool in Adobe Digicam Raw or Lightroom to simply click on the white component of the lens cap to established the WB. You will then have properly accurate shades and white harmony, which you can then sync with your other photographs. This is helpful if you’re consistently misplacing your grey cards and coloration precision is vital to you.
02 Make a pinhole lens
Just take splendidly lo-fidelity visuals with a primary pinhole lens, which you can craft with a spare system cap. To start out, mark the centre of your body cap and spot it in a vice or on top rated of an old piece of scrap wood. Then use a drill bit that is about 1cm in diameter to drill by way of the center of the cap.
Smooth off any rough edged with sand paper and make certain it’s entirely clean up with no smaller plastic particles left. Now tape a tiny piece of tin foil on to the rear facet to protect the hole, get your time so you end up with a neat end. Subsequent, you will need to prick a tiny gap in the foil with a pin – generating your pinhole lens entire.
Connect it to your digital camera and go into Handbook manner to get started using abstract, lo-fi photos. We also identified a tripod to be useful when shooting.
03 Never shed lens caps yet again
One particular dilemma I’m absolutely sure we have all faced with lens caps is using them off and losing them. An ingenious answer is to attach a piece of string to your lens cap and hook this on to the digicam strap mount on your digital camera entire body, which is common on bridge cameras. While only operates nicely if you are using lenses that have the exact same filter thread, or you only system to use the just one lens for very long durations.
To do it, take out the lens cap and position it on to a surface you do not intellect drilling into, such as an old block of wooden, and drill two smaller holes at the outer edge of the lens cap. Now clean off any burred edges with sandpaper and feed your nylon string by means of, then loop it on to the digital camera strap mount.
04 Preserve your memory playing cards safe
If you are regularly misplacing your SD playing cards in your kit bag this idea might just support you keep them additional organized. Just take a spare overall body cap and rear lens cap and slip your SD cards into them and then screw the caps back again jointly. They are then in a unforgettable area and will not be in a position to slip out of your bag unnoticed. They’ll also be a bit extra splash-evidence, far too, so give it a go!
05 Include some colour!
Possessing a set of brightly coloured caps, like these from Fotodiox, will make them tougher to drop close to your property or on a shoot as they immediately stand out, they also make it easier to come across your kit when exploring via your kit bag at night when visibility is bad.
06 Considering caps
We like the garments from Cooph, standing for Cooperative of Images, as some of its garments like the Beanie Cozy L-Cap have an integrated lens cap pocket. Some of their shirts also element a pocket for a lens cap and some have an built-in microfibre lens cleansing cloth way too, so could be the perfect remedy if like me you’re continually misplacing them. Be sure to verify out the whole range listed here.
Go through much more:
The greatest tripods for photographers
The finest pan and tilt heads for tripods
The greatest journey tripods